http://www.hebeimetal.cn
Home > Products > Woven Mesh > Geotextile > Geotextile Fabric Cost Geotextile Production Line

Geotextile Fabric Cost Geotextile Production Line

    Unit Price: USD 2 / Square Meter
    Payment Type: L/C,T/T,D/P
    Incoterm: FOB,CFR,CIF
    Min. Order: 100 Square Meter
    Delivery Time: 15 Days
Basic Info

Thickness: 0.9-5.0mm

Color: White

Application: Railway

Product Name: Geotextile

Weight: 150g

Type: Polyester Staple Fiber

Size: 60x50

Usage: Construction

Packing: Woven Bag

Additional Info

Packaging: By seaworthy packing

Productivity: 50000M2/month

Brand: CSATR

Transportation: Ocean,Air

Place of Origin: China

Supply Ability: 50000M2/month

Certificate: CE

Product Description

Geotextile Fabric Cost Geotextile Production Line

The basic requirements for the laying of geotextiles:
1. The seam must intersect with the slope surface line; the distance of the horizontal seam must be greater than 1.5m where the slope is balanced or where there may be stress.
2. On the slope, anchor one end of the geotextile, and then roll the roll down to ensure that the geotextile stays tight.
3. All geotextiles should be pressed with sand bags. The sand bags will be used during the laying and retained until the top layer is laid.
Geotextile laying process requirements:
1. Grassroots inspection: Check whether the grass-roots level is smooth and solid. If there are foreign materials, it should be handled properly.
2, trial shop: According to the site conditions, determine the size of geotextiles, after cutting trial shop, the cutting size should be accurate.
3. Check whether the width of the saliva is appropriate. The lap joint should be smooth and moderate.
4. Positioning: Use a hot air gun to bond the overlapping parts of the two geotextiles. The distance between the bonding points should be appropriate.
5. When suturing the lap joint, the suture should be straight and the stitches should be even.
6. After the sewing, check whether the geotextile is laid flat and whether there is any defect.
7, if there is an undesirable phenomenon, it should be repaired in a timely manner.
Self-test and repair:
a. All geotextile sheets and seams must be inspected. Defective geotextile sheets and stitches must be clearly marked on the geotextile and repaired.
b. The worn geotextiles must be repaired by laying and thermally connecting geotextile pieces that are at least 200 mm longer than the edge of the defect in all directions. The thermal connection must be strictly controlled to ensure that the geotextile patch and geotextile are tightly bonded and that there is no damage to the geotextile.
c. Before the end of daily laying, visually inspect the surface of all laid geotextiles on the day to ensure that all damaged areas are marked and immediately repaired. Make sure that there are no foreign materials on the laying surface that may cause damage, such as fine needles and small irons. Nails and so on.
d. The following technical requirements should be met when repairing the geotextiles:
e. Patch materials used to fill holes or make up cracks should be consistent with geotextiles.
f. The patch should extend at least 30 cm beyond the damaged geotextile.
g. At the bottom of the landfill, if the geotextile crack exceeds 10% of the width of the coil, the damaged part shall be removed and the two geotextiles shall be connected; if on the slope, the breach exceeds 10% of the width of the coil, Remove the geotextile and replace it with a new one.
h. Work shoes worn by construction workers and construction equipment used shall not damage geotextiles. Construction workers shall not do any work that may damage geotextiles on laid geotextiles, such as smoking or stamping geotextiles with sharp tools.
i. For the safety of geotextile materials, the packaging film should be opened before the laying of geotextiles, ie roll a roll and open a roll. And test the appearance quality.
j. Specially proposed: Geotextiles should be checked and accepted in a timely manner after they arrived at the site.


Product Specification:


project\index\standard

150

200

100

250

300

350

400

450

500

600

800

remarks

Mass area ratio,

deviation,%

8

8

8

8

7

7

7

7

6

6

6

thickness,mm ≥

0.9

1.3

1.7

2.1

2.4

2.7

3.0

3.3

3.6

4.1

5.0

range,deviation,%

-0.5

Breaking strength,KN/m ≥

2.5

4.5

6.5

8.0

9.5

11.0

12.5

14.0

16.0

19.0

25.0

Vertical and horizontal direction

Elongation at break,%

25~100

CBR bursting strength,KN ≥

0.3

0.6

0.9

1.2

1.5

1.8

2.1

2.4

2.7

3.2

4.0

Effective aperture0 (0 ),mm

0.07~0.2

Vertical infiltration parameters ,cm/s

Kx(10~10)

K=1.0 ~9.9

Tear strength,KN≥

0.08

0.12

0.16

0.20

0.24

0.28

0.33

0.38

0.42

0.46

0.60

Vertical and horizontal direction

geotetile

geotetile 2geotetile 3

Application:

geotetile 4

We also produce Aluminum Window Screen, Stainless Steel Wire Mesh, Expanded & Perforated Metal, Steel Pipe , Galvanized Iron Pipe, Seamless Steel Pipe , Corner Bead . Wire Mesh Filter , Woven Mesh , Decorative Wire Mesh, Hexagonal Wire Mesh, Galvanized Welded Wire Mesh,Galvanized Roofing Sheet .

Welcome inquiry, we will quote our best price.

Looking for ideal Geotextile Production Lines Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Geotextile Fabric Cost are quality guaranteed. We are China Origin Factory of Non Woven Geotextile. If you have any question, please feel free to contact us.

Product Categories : Woven Mesh > Geotextile

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Karry Ms. Karry
What can I do for you?
Chat Now Contact Supplier