http://www.hebeimetal.cn
Home > Products > Woven Mesh > Geotextile > Non Woven Geotextile Polypropylene Geotextile Price

Non Woven Geotextile Polypropylene Geotextile Price

    Unit Price: USD 2 / Square Meter
    Payment Type: L/C,T/T,D/P
    Incoterm: FOB,CFR,CIF
    Min. Order: 100 Square Meter
    Delivery Time: 15 Days
Basic Info

Thickness: 0.9-5.0mm

Color: White

Application: Railway

Product Name: Geotextile

Weight: 150g

Type: Polyester Staple Fiber

Size: 60x50

Usage: Construction

Packing: Woven Bag

Additional Info

Packaging: By seaworthy packing

Productivity: 50000M2/month

Brand: CSATR

Transportation: Ocean,Air

Place of Origin: China

Supply Ability: 50000M2/month

Certificate: CE

Product Description

Non Woven Geotextile Polypropylene Geotextile Price

Geotextile rolls should be protected from damage prior to installation. Geotextile rolls should be piled up in places that are not flattened, piled up to a height of no more than four rolls, and the identification sheet of the roll can be seen. Geotextile rolls must be covered with opaque material to prevent UV aging. During the storage process, the integrity of the label and the integrity of the data should be maintained.
Filament geotextile construction site
Filament geotextile construction site
Geotextile rolls must be protected from damage during transport (including on-site transportation from the material storage site to the work site).
Physically damaged geotextile rolls must be repaired. Geotextiles that are heavily worn cannot be used. Any geotextile exposed to leaking chemical agents is not allowed to be used in this project.
Geotextile laying method:
1. Use artificial roller shop, cloth surface should be flat, and leave the deformation margin.
2. The installation of filament or short-filament geotextiles is usually done by lap, stitching and welding. The width of stitching and welding is generally 0.1 m or more, and the lap width is generally 0.2 m or more. Geotextiles that may be exposed for a long period of time should be welded or sewn.
3, geotextile suture:
All stitching must be done continuously (for example, point seams are not allowed). Before overlapping, the geotextiles must overlap by a minimum of 150mm. The minimum stitch distance is at least 25mm from the selvage (the exposed edge of the material).
The seams of the sewn geotextiles include one line of wire-lock chain stitching. The thread used for sewing should be a resin material with a minimum tension of more than 60N, and has chemical resistance and UV resistance comparable to or exceeding those of geotextiles.
Any "leaked needle" on the sewn geotextile must be re-sewn in the affected area.
Corresponding measures must be taken to prevent soil, particulate matter or foreign matter from entering the geotextile after installation.
Cloth laps can be divided into natural laps, seams, or welds depending on the terrain and function of use.
4. During construction, the geotextile above the geomembrane adopts natural overlap, and the upper geotextile of the geomembrane is seamed or hot-air welded. Hot air welding is the preferred method of connecting long filament geotextiles, that is, the instant heat of the two pieces of cloth is heated by a hot air gun, and the parts are brought into a molten state, and they are firmly bonded together with a certain external force. . In the case of wet (snow and snow) weather where thermal adhesion is not possible, geotextiles should be subjected to another method of stitching, that is, a special sewing machine for two-wire stitching and a chemical-resistant UV-resistant suture.
The minimum width is 10cm when sewing, the minimum width is 20cm when lapped naturally, and the minimum width is 20cm when hot air welding.
5. For seaming, use the same stitching quality as geotextile. The seam line should be made of a material that resists chemical damage and ultraviolet light.
6. After laying geotextiles, the geomembrane shall be laid after being approved by the site supervision engineer.
7. The geotextile on geomembrane is laid in the geomembrane after approval by Party A and the supervisor.
8. The numbers for the geotextiles on each floor are TN and BN.
9. The two layers of geotextile on the membrane should be embedded in the anchoring groove together with the geomembrane at the anchoring groove.


Product Specification:


project\index\standard

150

200

100

250

300

350

400

450

500

600

800

remarks

Mass area ratio,

deviation,%

8

8

8

8

7

7

7

7

6

6

6

thickness,mm ≥

0.9

1.3

1.7

2.1

2.4

2.7

3.0

3.3

3.6

4.1

5.0

range,deviation,%

-0.5

Breaking strength,KN/m ≥

2.5

4.5

6.5

8.0

9.5

11.0

12.5

14.0

16.0

19.0

25.0

Vertical and horizontal direction

Elongation at break,%

25~100

CBR bursting strength,KN ≥

0.3

0.6

0.9

1.2

1.5

1.8

2.1

2.4

2.7

3.2

4.0

Effective aperture0 (0 ),mm

0.07~0.2

Vertical infiltration parameters ,cm/s

Kx(10~10)

K=1.0 ~9.9

Tear strength,KN≥

0.08

0.12

0.16

0.20

0.24

0.28

0.33

0.38

0.42

0.46

0.60

Vertical and horizontal direction

geotetile

geotetile 2geotetile 3

Application:

geotetile 4



We also produce Aluminum Window Screen, Stainless Steel Wire Mesh, Expanded & Perforated Metal, Steel Pipe, Corner Bead.Wire Mesh Filter,Decorative Wire Mesh.

Welcome inquiry, we will quote our best price.



Looking for ideal Non Woven Geotextiles Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Polypropylene Nonwoven Geotextiles are quality guaranteed. We are China Origin Factory of Geotextiles Filters Fabric. If you have any question, please feel free to contact us.

Product Categories : Woven Mesh > Geotextile

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Karry Ms. Karry
What can I do for you?
Chat Now Contact Supplier